Information Center - Information Center
- Paper jam in the automatic document feeder
Lexmark CX410 Not your product? Search the Information Center - Remove all original documents from the ADF tray.
- Open the ADF cover.
- Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
- Close the ADF cover.
- Flex, fan, and align the paper edges before loading.
- Reload the documents into the ADF.
Was this article helpful? Related content
- Multiple or shingled sheets picked up by the automatic document feeder (ADF)
Multiple or Shingled Sheets Picked by the Autodocument Feeder
- 280.13, 281.16, 282.03 ADF scanner jam
280.13, 281.16, 282.03 Automatic Document Feeder (ADF) scanner jam
- Manuals and Guides
- How-to Videos
- Specifications
- Menu Map
When an original gets jammed while passing through the Automatic Document Feeder (ADF), a warning message appears on the Display Screen. CAUTION: To avoid tearing the originals, remove the jammed item slowly and gently. NOTE: To prevent paper jams, use the Document Glass for thick, thin, or mixed paper-type originals. - Remove any remaining pages from the ADF.
- Lift open the ADF cover.
- Gently remove the jammed paper from the ADF. If there is no paper in this area, go to the next step.
- If necessary, use two hands to raise the Duplex unit and pull any jammed originals gently out of the document feeder. If there is no paper in this area, go to the next step.
- Lower the Duplex unit, and close the ADF cover.
- Lift the ADF and gently pull out any jammed originals.
- Close the ADF.
- Reload the removed pages into the ADF and press the [Start] button on the Control Panel to resume the job.
Current position : Home\>FAQ\>Troubleshooting\>When a Paper/Staple Jam Is Occurring\>When a paper jam has occurred\>Paper Jam in ADF - Open the ADF Feed Cover.
- Remove the remaining original from the Original Tray.
- Open the ADF.
- Remove the jammed original.
- Close the ADF.
- Close the ADF Feed Cover.
Search * Enter a keyword. You can search within the user's guide. Current position : Home\>FAQ\>Troubleshooting\>When a Paper/Staple Jam Is Occurring\>When a paper jam has occurred\>Paper Jam in ADF Item of the same category as for the current page
- Paper Jam in Bypass Tray or Transfer Roller
- Paper Jam in Tray1
- Paper Jam in Tray2 or Tray3
- Paper Jam in ADF
- Paper Jam in 2-Sided Print Unit
- Paper Jam in Fuser Unit
- Paper Jam in Finisher (bizhub C3851FS)
Link to page for each function
- Home
- Print
- Scan
- Fax
- Network Fax
- PC-FAX
- Copy
- Box
- Advanced Function
| 
